Preparation and characterization of new inorganic–organic hybrid catalyst H3PMo12O40/Hyd‐SBA‐15 and its application in the domino multi‐component reaction

We present novel inorganic–organic hybrid catalyst to accomplish domino multi‐component reaction (MCR) for synthesis of 3‐amino‐2′‐oxospiro[benzo[c]pyrano[3,2‐a]phenazine‐1,3′‐indoline]‐2‐carbonitrile/carboxylate derivatives. This methodology offers remarkable development by easy production of H₃PMo₁₂O₄₀/Hyd‐SBA‐15 in regard to solving the problem of using harsh catalysts, also it demonstrates to be impressive and environmentally friendly in term of low reaction times and high yields.     

Spherical hollow mesoporous silica supported phosphotungstic acid as a promising catalyst for α-arylstyrenes synthesis via Friedel-Crafts alkenylation

This work presents a scalable approach for preparing spherical hollow mesoporous silica with high surface area/pore volume, serving as outstanding support for supported phosphotungstic acid catalyst with much superior catalytic performance to the one on previously reported spherical mesoporous silica toward diverse transformations, ascribed to the strengthened mass transfer and the enlarged exposure degree of acidic sites to reactants those resulting from unique hollow and mesoporous morphology.     

Janus Gold Nanostars–Mesoporous Silica Nanoparticles for NIR-Light-Triggered Drug Delivery

Janus gold nanostar–mesoporous silica nanoparticle ( AuNSt–MSNP ) nanodevices able to release an entrapped payload upon irradiation with near infrared (NIR) light were prepared and characterized. The AuNSt surface was functionalized with a thiolated photolabile molecule ( 5 ), whereas the mesoporous silica face was loaded with a model drug (doxorubicin) and capped with proton-responsive benzimidazole-β-cyclodextrin supramolecular gatekeepers ( N 1 ). Upon irradiation with NIR-light, the photolabile compound 5 photodissociated, resulting in the formation of succinic acid, which induced the opening of the gatekeeper and cargo delivery. In the overall mechanism, the gold surface acts as a photochemical transducer capable of transforming the NIR-light input into a chemical messenger (succinic acid) that opens the supramolecular nanovalve. The prepared hybrid nanoparticles were non-cytotoxic to HeLa cells, until they were irradiated with a NIR laser, which led to intracellular doxorubicin release and hyperthermia. This induced a remarkable reduction in HeLa cells viability.     

Control of chain ends of polyesters in polycondensation of AA and BB monomers by use of solid‐phase reagent

For selective synthesis of linear polyester having a functional group at one end, polycondensation between 1,4‐butanediol ( 1a ) and sebacoyl chloride ( 2a ) and between 1,12‐dodecanediol ( 1b ) and isophthaloyl chloride ( 2b ) was conducted in the presence of oxime resin or oxime silica gel, followed by cleavage of the formed polyester from the solid‐phase support with aniline. Matrix‐assisted laser desorption ionization time‐of‐flight mass spectra and ¹H NMR spectra of the cleaved polyester showed that the products contained not only polyester with anilide at one end ( poly 1 ), but also polyester with anilides at both ends ( poly 2 ). The product ratio of poly 1 to poly 2 ( poly 1 / poly 2 ) was dependent on monomers, monomer concentration, feed ratio of monomer to oxime moiety in the support, oxime content in the support, reaction solvent, and the nature of the support. Polyester with a high poly 1 / poly 2 ratio of 81/21 and moderate molecular weight (M_n = 1430 g/mol) was obtained by polycondensation of 1b and 2b in the presence of oxime silica gel in dichloromethane. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1379–1386     

Comparison of monomethoxy‐, dimethoxy‐, and trimethoxysilane anchor groups for surface‐initiated RAFT polymerization from silica surfaces

The immobilization of reversible addition–fragmentation chain transfer (RAFT) agents on silica for surface‐initiated RAFT polymerizations (SI‐RAFT) via the Z‐group approach was studied systematically in dependence of the functionality of the RAFT‐agent anchor group. Monoalkoxy‐, dialkoxy‐, and trialkoxy silyl ether groups were incorporated into trithiocarbonate‐type RAFT agents and bound to planar silica surfaces as well as to silica nanoparticles. The immobilization efficiency and the structure of the bound RAFT‐agent film varied strongly in dependence of the used solvent (toluene vs. 1,2‐dimethoxyethane) and the anchor group functionality, as evidenced by atomic force microscopy, transmission electron microscopy, dynamic light scattering, and UV/Vis spectroscopy. Surface‐initiated RAFT polymerizations using functionalized silica nanoparticles revealed that grafted oligomers, which often occur in SI‐RAFT, are not formed within the crosslinked structures that originate from the immobilization, and that RAFT‐agent films that show less aggregation during the immobilization are more efficient during SI‐RAFT in terms of polymer grafting density. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 103–113     

Hybrid cyclotriphosphazene–polysiloxane–nano-SiO2 composites with improved mechanical properties

Starting from the functional cyclotriphosphazene, polysiloxane and nano-SiO₂ precursors, three new hybrid nanocomposites with reinforced mechanical properties were prepared. Young’s modulus values for all the composite samples are similar in the range of 7–11 MPa, stress at fracture increases with the nano-SiO₂ content increase in the material and reaches a maximum value of 36 MPa for the composite with 20% nano-SiO₂. The nanocomposites investigated are elastic and demonstrate the ability to be deformed without failure up to 54% strain.     

酰胺功能化修饰琼脂糖/硅胶复合材料的制备及吸附性能研究

采用溶胶-凝胶法,以氧化琼脂糖和四甲氧基硅烷为前驱体,通过水解、缩聚反应制得琼脂糖/硅胶复合材料,进一步利用开环、"巯-烯"点击和酰胺化反应对复合材料实现酰胺基团功能化修饰.借助红外光谱(FT-IR)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)对所制备复合材料进行结构、组成和微观形貌表征.以制备的酰胺功能化修饰琼脂糖/硅胶复合材料为吸附剂,探讨其对莱克多巴胺的吸附过程,实验考察了溶剂、吸附时间、莱克多巴胺的初始浓度等对吸附的影响.结果表明:经过修饰反应酰胺基团成功接枝到琼脂糖/硅胶复合材料,该材料颗粒呈球形,粒径在2～3μm之间;复合材料对莱克多巴胺表现出良好的吸附性能,吸附过程50 min达到平衡,适合准二级动力学特征,属化学吸附,吸附等温线符合Freundlich模型;复合材料经过6次吸附解析,再生后对莱克多巴胺的吸附率仅有小幅下降,表明具有较好的循环再生吸附能力.     

紫外熔石英元件高精度低缺陷控形控性制造技术研究进展

传统的紫外熔石英元件加工方法本身会引入各类制造缺陷,需要后期加工来消除前期加工带来的缺陷,限制了熔石英元件的加工质量和加工效率。针对这些问题,课题组提出了采用磁流变、离子束、保形光顺和流体动压抛光等可控柔体加工技术提升熔石英元件的加工效果,并开展了相关研究。主要介绍了课题组在关键技术上取得的重要进展,包括亚纳米精度表面控形制造技术、纳米精度本征表面控性生成方法、熔石英元件高精度低缺陷组合工艺与设备等一系列关键技术。通过探讨关键技术及其发展现状,为未来紫外熔石英元件高精度低缺陷制造技术的发展提供参考。     

氨基化树枝状介孔二氧化硅固定葡萄糖氧化酶用于检测葡萄糖

以三乙胺为碱源合成了树枝状介孔二氧化硅纳米粒子（DMSNs），并用3-氨基丙基三乙氧基硅烷（APTES）进行氨基修饰合成了氨基化树枝状介孔二氧化硅纳米粒子（DMSNs-NH₂），将其用于葡萄糖氧化酶（GOD）的固定化研究.采用扫描电子显微镜、透射电子显微镜、红外光谱仪、X射线衍射仪、氮气吸附仪及热重分析仪对固定化GOD（DMSNs-NH₂-GOD）进行了表征，测定了其活性及蛋白载量.结果表明，固定化GOD的直径约为200 nm，形状均一，呈分散的球形微粒；在最佳固定条件下，蛋白载量达225 mg/g，酶活性达215 U/mg；固定化GOD检测葡萄糖的最低检测限为0.0014 mg/mL.利用固定化GOD检测了血清和饮料中的葡萄糖，重复使用36次以上其相对酶活性仍剩余80%.该方法操作方便、准确度高，提高了酶的pH稳定性、热稳定性及重复使用性，降低了检测成本.     

Performance evaluation of functionalized ordered mesoporous silica for VOCs adsorption by molecular dynamics simulation

Volatile organic compounds (VOCs) are growing pollutants now that cause the serious environmental pollution and threaten human health. The functionalized ordered mesoporous silica (FOMS) has attracted considerable attention in adsorbing VOCs. In this paper, the molecular dynamics simulation was used to simulate the adsorption performance of FOMS on VOCs (acetone, ethyl acetate and toluene). After simulating different pore sizes (2 nm, 3 nm and 4 nm) adsorption performances of ordered mesoporous silica (OMS) on VOCs, OMS with a pore size of 4 nm was selected to further study the influence of functional groups (vinyl, methyl, and phenyl). The following law was obtained: the saturated adsorption capacities of vinyl-functionalized OMS (V-FOMS) to acetone, ethyl acetate and toluene were 3.045 mmol.g^?1, 2.568 mmol.g^?1 and 1.976 mmol.g^?1 respectively; the saturated adsorption capacities of methyl-functionalized OMS (M-FOMS) to acetone, ethyl acetate and toluene were 2.798 mmol.g^?1, 2.312 mmol.g^?1 and 1.698 mmol.g^?1 respectively; the saturated adsorption capacities of phenyl-functionalized OMS (P-FOMS) to acetone, ethyl acetate and toluene were 2.124 mmol.g^?1, 1.941 mmol.g^?1 and 1.539 mmol.g^?1 respectively. These results show that the adsorption ability of FOMS for different adsorbates follows the sequence of acetone > ethyl acetate > toluene. Furthermore, the interaction between functional groups (vinyl, methyl and phenyl) in FOMS and VOCs was explored. It is found that the interaction between different functional groups and adsorbates is different (interaction energy effect). This interaction energy effect promotes FOMS to better adsorb VOCs. This work would provide fundamental understanding and guidance for the development of novel adsorption materials for the adsorption of VOCs.